Simply the best hydraulic pump you will ever use!
Introducing the Enerpac Z-Class hydraulic pumps - pumps that run
cooler, use less electricity and are easier to service compared to
conventional pumps. ZE-Series Electric Pumps with Z-Class pump
element.

• Highly efficient design: increased oil flow rates, reduced
  heat generation, decreased power consumption.
• Heavy-duty bearings: extends pump life by reducing
  friction and surface-loading, lower bearing stresses.
• Pump cavity oil bath: extends pump life by reducing
  heat, improving lubrication and reducing wear.
• Self-priming, high flow 1st stage pump: improving oil flow
  in hot and cold weather operation by super-charging the
  2nd stage piston pump.
• Balanced rotating components: reduce vibration, reduce
  wear and friction –smoother running pump.
• Replaceable piston check-valves: reduce increase service
  life of major pump components.
  
  

ZE-Series 10.000 psi (700 bar) electric pumps

• Available in 4 oil flow ranges:

ZE3-Series: 40 in3/min at 10.000 psi (0,55 l/min at 700 bar)
ZE4-Series: 60 in3/min at 10.000 psi (0,82 l/min at 700 bar)
ZE5-Series: 120 in3/min at 10.000 psi (1,64 l/min at 700 bar)
ZE6-Series: 200 in3/min at 10.000 psi (2,73 l/min at 700 bar)

• Single and two stage models
• With manual or solenoid valves
• User adjustable relief valve built-in on all valves
• 5 steel reservoir sizes: 1, 2, 2,5, 5 and 10 gallon useable
  oil (4, 8, 10, 20 and 40 litres)
• LCD-Electric Box provides essential user information
• Extensive list of factory options & accessories kits: LCD
  Electric Box, Heat Exchanger, Roll Bar, Skid Bar, Oil Level/Temperature Switch, Pressure Switch, Pressure
  Transducer, Return Line Filter, Pressure Gauge and
  Foot Switch